Industrial Automation, Fault Diagnosis & Electrical Safety
PLC · Profibus/Profinet · Industrial Networks · DGUV V3 Inspections · Thermography – for industry and commercial operations in Baden-Württemberg.
Commissioning support for machine builders and English-speaking service for international operators of German plants.
For industry, commercial operations and electrical contractors only.
What's pending at your plant?
Straight to the right entry point – from acute downtime to an inspection that is due.
Plant down / isolate the fault
Systematic fault isolation on PLCs, drives and fieldbus – remote diagnosis where possible.
First response by phone around the clock.
Modernize controls (S7 → TIA)
S7-300/400 discontinued: migration paths, asset survey and a defined fallback plan.
Diagnose Profibus/Profinet
Measure bus levels and telegram traffic, narrow down the cause – before swapping parts.
Organize a DGUV V3 inspection
Portable appliances, fixed installations, machinery and PV systems – with test reports and an interval overview.
Build an industrial network
OT/IT segmentation, industrial Wi-Fi and remote-maintenance access for production.
Switch your inspection provider
Your current inspection provider is retiring? We take over inspection history and documentation.
Qualifications and availability
Named qualifications with their scope, named test equipment and membership in the PROFIBUS User Organization.
TÜV SÜD: qualified person
Qualified person (befähigte Person) for testing electrical installations and equipment per DGUV Vorschrift 3.
Siemens SITRAIN
Trained on TIA Portal, S7-1200/1500, Safety Integrated and SINAMICS.
Thermography qualification
TÜV SÜD Academy: thermography on electrical installations.
Named test equipment
Calibrated Fluke instruments, Indu-Sol bus diagnostics (PROFItest, PROFINETinspector), Siemens TIA Portal.
Member of the PROFIBUS User Organization (PI)
Access to the current specifications, profiles and installation guidelines for PROFIBUS, PROFINET and PROFIsafe. Diagnostics and engineering by the rules of the organization that maintains the standard.
Entry in the PI member directory
In a fault situation (PLC, Profibus/Profinet, network): first response by phone around the clock – on-site response depending on availability and service zone.
Two service areas: automation and testing
Automation, industrial networks, and electrical safety from one technical team.
Service Area A
Automation & Industrial Maintenance
Fault isolation, PLC work and stable OT networks for Siemens-based plants – measured with Indu-Sol and Fluke equipment, not guessed.
Profibus/Profinet Diagnostics
On-Site Fieldbus Troubleshooting
On-site fieldbus troubleshooting in Germany: physical bus measurement, telegram analysis, fault isolation and repair.
Request diagnosticsPLC & Commissioning Services
Siemens S7/TIA
Siemens S7/TIA commissioning support for machine builders, retrofit and fault analysis for operators of German plants.
View capabilitiesIndustrial Networks
OT & IT Infrastructure
Network infrastructure for production sites: OT/IT segmentation, industrial Wi-Fi, secure remote access and diagnostics.
Discuss a network projectService Area B
Testing & Safety
DGUV V3 inspections, thermography under load and ATEX inspections – documented with test report, label and interval overview.
DGUV V3 Inspections
Electrical Safety at German Sites
Legally required inspections of electrical systems and equipment per DGUV Regulation 3 – the recurring operator duty at every German site.
Request an inspectionElectrical Thermography
Inspections Under Load
Thermographic inspection of electrical systems under load – overheating and loose connections found before they cause failures.
Request thermographyExplosion Protection
ATEX & BetrSichV Inspections
Inspections in hazardous areas according to ATEX directive and operational safety regulations.
Explosion protection detailsYour inspection provider is retiring or has no capacity left?
We take over your plant documentation seamlessly: asset review, transfer of the inspection history, deadline monitoring and continuation of the inspections – as a structured takeover process, not a rush job.
Discuss taking over your inspection portfolioExcerpts from public Google reviews of AMA Systems.
“The DGUV V3 inspections were carried out quickly, professionally and reliably.”
“The team stands out for its strong expertise, reliability and an exceptionally friendly manner.”
“Fast execution, clear communication and a reliable partner.”
Technical knowledge from the field
Fault patterns, diagnostic paths and inspection intervals – reference articles from our knowledge base. The articles are in German.
German-language reference
Profibus fault patterns: bus levels, termination, telegram errors
Typical measurement patterns and probable causes – from a creeping level drop to sporadic bus failure.
German-language reference
Isolating a PLC fault systematically
Diagnostic buffer, LED states, OB errors: the order in which to narrow down the cause – and when external diagnosis makes sense.
German-language reference
DGUV V3 inspection intervals by equipment category
Guide values by equipment category and environment – depending on the risk assessment, without a one-size-fits-all calendar.
For industry, commercial operations and electrical contractors only.
Get in Touch
Your inquiry gets to the right engineer fastest through the matching service page – each one has a form that asks the right questions.
Didn't find what you were looking for? No problem – write to us directly:
Phone
+49 7821 5490311Location
Lotzbeckstr. 12, 77933 LahrAvailability
Mon–Fri 08:00–17:00 · technical on-call line for production emergencies
Um die Karte anzuzeigen, akzeptieren Sie bitte funktionale Cookies.
In Google Maps öffnen →